Descrizione

DJI RONIN 2 Package

Electrical and Mechanical

Working Current Static: 300 mA (at 22.8 V)

Dynamic: 500 mA (at 22.8 V)

Locked Motor: Up to 15 A (at 22.8 V)

Performance

Payload Capacity 30 lb / 13.6 kg

Precision of Control ± 0.02°

Maximum Controlled Rotation Speed Pan Axis: 400°/s

Tilt Axis: 360°/s

Roll Axis: 360°/s

Controlled Rotation Range Pan Axis Control: 360° continuous rotation

Tilt Axis Control: +45° to -135°

Roll Axis Control: ±45°

Battery Life Maximum: 8 hours

Typical when Powering Camera/Accessories: 2.5 hours

Gimbal Controller

CPU 32-bit ARM processor

Sensors Independent IMU module

Temperature sensors

Positioning GPS

Operation Modes Underslung Mode

Upright Mode

Briefcase Mode

Interface Built-in touch panel

Receiver

Frequency 2.4 GHz / 5.8 GHz switchable

Connectivity

Wireless Bluetooth 4.0

Wired 1 x D-Bus

1 x USB Type-C

Accessory Power Ports 4 x 14.4 V Camera Cage (combined 8 A)

2 x 12.6 V Pan Motor (combined 4 A)

1 x 12.6 V P-Tap (8 A)

System Requirements

Assistant Software Windows: 7 or above

macOS: 10.11 or above

iOS: 9 or above

Android: 4.4 or above

Battery

Chemistry Lithium-ion polymer

Capacity 4280 mAh / 97.58 Wh

Voltage 22.8 V

Note Compatible with Inspire 2 flight battery. Not compatible with batteries for prior Ronin models.

General

Camera Tray Dimensions Maximum Depth from the Center of Gravity on Camera Baseplate: 9.6″ / 245 mm

Maximum Height Measured from Top of the Camera Baseplate: 6.5″ / 165 mm

Maximum Width: 7.1″ / 180 mm

Mounting Compatibility Handheld

Car Mount

Aerial

Tripod

Steadicam
Note: Separately available mounting hardware may be required.

Operating Temperature -4 to 122°F / -20 to 50°C

Dimensions (W x D x H) Including Handle Bar: 24.8 x 16.4 x 28.3″ / 630 x 416 x 720 mm

Excluding Handle Bar: 13.8 x 16.4 x 20.9″ / 350 x 416 x 530 mm

Weight Including Handle Bar: 12 lb / 5.5 kg

Excluding Handle Bar: 9 lb / 4.2 kg